Origin	China
Model Number	GM Tech-2 PRO Kit (CANdi & TIS)

Product Name:  GM Tech-2 PRO Kit (CANdi & TIS)

Part No.:  CCX012

Net Weight:  6.5KG

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech-2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2007

Features:

Authentic GM software in the Tech-2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.

Support for on-board diagnostics on all GM systems 1992 thru current year.

Removable hardware modules provide insurance against scan tool obsolescence.

Large, easy-to-read backlit screen.

RS232 & RS485 ports provide the avenue to connect future devices to your Tech-2 Flash.

Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.

Ability to view the status of vehicle diagnostic tests as they run.

Bi-directional

The authentic GM 1992-current year software will provide full bi-directional controls when performing power train, chassis, and body diagnosis.

Vetronix Tech-2 Specifications

Dimensions 12″×6″×2″

Microprocessor 32 bit, 16 MHz

Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion.

Communications Integral RS232 communication port.

Screen 3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once

GM Tech-2 Starter Kit with CANdi Module & TIS Kit includes (All ORIGINAL and NEW!):

l         Tech-2

l         3000164-CANdi module

l         memory card 32MB- 1pcs

kit of the cables:

l         3000095-DLC cable

l         3000096-Cigarette lighter power cable

l         3000097-Battery power cable

l         3000098-SAE 16/19 pin adapter (OBD2)

l         3000099- NAO 12/19 adapter

l         3000109-DLC loopback adapter (selftest)

l         DVD with software :

Opel TIS 01/2008,

SAAB TIS 1/2008,

NAO TIS 10/2007,

ISUZU TIS 03/2006;

manuals in DVD

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech-2 Flash and a CAN diagnostic interface module. The module connects between the Tech-2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.

The following GM vehicles utilize the CAN interface:

’05 Buick Allure (3.6L)

’05 Buick LaCrosse (3.6L)

’05 Buick Rainier (5.3L)

’04-’05 Buick Rendezvous (3.6L)

’04-’05 Cadillac CTS (3.6L)

’04-’05 Cadillac SRX (3.6L / 4.6L)

’04-’05 Cadillac XLR (4.6L)

’05 Cadillac STS (3.6L / 4.6L)

’05 Chevrolet Cobalt (2.2L)

’05 Chevrolet Corvette (6.0L)